Text only | Text with Images

RC India

RC Equipments => Tools, Materials and Building Techniques => Topic started by: joelrebello on October 28, 2013, 02:56:33 PM

Title: What material is used on the FTversa wing?
Post by: joelrebello on October 28, 2013, 02:56:33 PM
Hey :)

I plan to build an FTversa Wing, based on the design here - http://flitetest.com/articles/ft-versa-wing

Can someone help me identify the foam material, it doesn't look like Sunboard or Depron or Corosheet,
any thoughts on what material it is and if its possible to source in Mumbai.

Thanks!
Title: Re: What material is used on the FTversa wing?
Post by: rcrcnitesh on October 28, 2013, 03:06:50 PM
most of the ft planes are made out of dollar tree foam board which is depron covered with paper from both the sides.
not sure of this model
Title: Re: Re: What material is used on the FTversa wing?
Post by: aniket210696 on October 28, 2013, 03:38:27 PM
all ft models are made with Adams readyboard. you can make it with laminated depron or biofoam too.

Sent from a potato using a lamp - now mashed
Title: Re: What material is used on the FTversa wing?
Post by: joelrebello on October 28, 2013, 03:58:48 PM
Looking around in the forum, my sources in Mumbai for depron or biopac sheets are in AR street or Dadar.
Thank you for your replies!
Text only | Text with Images