Team,
The following are my electronics for a J500 Heli build, can anyone please suggest which connectors I should be ordering for connecting the wires of the following. Need to place an order with Hobby King.
If I can get any LHS reference for the same, it would be even better...!!! :help:
3xTurnigy S3317M Servo 26g / 3.0kg / .14sec
1x HKS9257 Servo for rudder
Turnigy Typhoon 500 Motor
Hobbyking SS Heli Series 70-80A ESC w/UBEC
Hobby King 401B AVCS Digital Head Lock Gyro
Please help with everything for example the connectors, plugs, extra length wires, heat sink tubes, switches etc. everything so that I can order everything in one order.... :help: :help: :help:
Servo and gyro comes with standard plugs already in place... so you need not to change their connectors. for motor to ESC you may use this
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10255
and for battery to esc you may use this
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9625
Isn this better for bat to esc? Cheaper and lighter.
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9284
most 11.1v batteries comes with same connector already soldered so you could save some time and money their otherwise the you can go for anything.
Quote from: findvikas on November 11, 2010, 01:02:14 PM
most 11.1v batteries comes with same connector already soldered so you could save some time and money their otherwise the you can go for anything.
i would not trust pre soldered battery connector from hobbyking, to many nice helis have crashed for friends who not have resoldered the connectors