Team,

The following are my electronics for a J500 Heli build, can anyone please suggest which connectors I should be ordering for connecting the wires of the following. Need to place an order with Hobby King.

If I can get any LHS reference for the same, it would be even better...!!! 

3xTurnigy S3317M Servo 26g / 3.0kg / .14sec
1x HKS9257 Servo for rudder
Turnigy Typhoon 500 Motor
Hobbyking SS Heli Series 70-80A ESC w/UBEC
Hobby King 401B AVCS Digital Head Lock Gyro

Please help with everything for example the connectors, plugs, extra length wires, heat sink tubes, switches etc. everything so that I can order everything in one order....     

Servo and gyro comes with standard plugs already in place... so you need not to change their connectors. for motor to ESC you may use this

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10255

and for battery to esc you may use this

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9625

Isn this better for bat to esc? Cheaper and lighter.
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9284

most 11.1v batteries comes with same connector already soldered so you could save some time and money their otherwise the you can go for anything.

Quote from: findvikas on November 11, 2010, 01:02:14 PM
most 11.1v batteries comes with same connector already soldered so you could save some time and money their otherwise the you can go for anything.

i would not trust pre soldered battery connector from hobbyking, to many nice helis have crashed for friends who not have resoldered the connectors