i cannot complete my quad because i did not get prop adapters with motors i ordered from rcmumbai ,and i am not getting them from anywhere ,if somebody have spare prop adapters they are not using ,kindly donate it to me i can use them for some time and then give it back or i can buy them .
need them urgently please help
regards
rohan

Usually you should get correct prop mounting tool for motors, But don't know why you can't get it with these emax motors. Have you contacted rcmumbai ?

whats the motor, model name, adapter size...

Prop adapters seem to be the nightmare of every quad guy, I lost one of the prop mounting nuts that came with my set of SunnySky x2212s  . None of the nuts at hardware stores were fitting. Luckily, Satya Sir has sent me a spare set  . I will go hunting for Nylock nuts this weekend.

I simply ziptie the props on the motor through the air holes instead of using adapters or prop savers. Less vibrations as well since the prop is nearer to the bell. However check the ties are good or replace before each flight. A guy called Ron in rcgroups was using it and stole his idea😊.

thank you all for your replies ,i contacted chintal sir of rcmumbai ,so im buying the prop adapters from him.
regards
rohan

@intorc, I thought that method some days back when I lost one of my adapter - but was afraid to do so - Is this trustable ? If it is It would be so better than adapters or savers

@sooraj Nothing to much afraid until the zip ties are hold enough tight, I am also using zip ties to hold props for more than 4months, still no issues, but if the zip ties are loosen and motors keep spinning then the zipties may scratch the windings of motor.

Thanks, you didn't tell this earlier
well, better Late than Never !