Hi Friends, :)
Need a 2200kv motor with flat mount which could be used with 30amp esc ,2s-3s lipo,50gram weight.
Thnks
I need opinion on this
http://cgi.ebay.in/RCFORALL-BRUSHLESS-OUTRUNNER-MOTOR-A-2826-6-/110705643653?pt=LH_DefaultDomain_203&hash=item19c6921085
can it be used with 30 amp esc?
any other 2200 kv motor links.?
is this same.??
http://www.rcindia.org/electric-power/need-motor-2200kv-outrunner/?topicseen
Use 50A ESC.
Max Watt = 342, Take efficiency = 0.98
Supply voltage = 11.1 Volt (3S)
So, current = (342) / (11.1 x 0.98 ) = 31.43A,
Taking Safety factor = 1.5,
ESC Currecnt rating = 31.43 x 1.5 = 47.16 A
So, A 50A ESC will be safe.
Of course use battery discharge current capable of delivering full load current = 31.43A
So, => 1.5AH, 25C at least. (1.5 x 25 = 37.5A)
Hope I can explain simply.
what is ur requirement for 2200kv motor?? is it jet or something else?
i have both motors 2212/06 (2200Kv) and 2826/06 (2200Kv) from RCtimer, and to my surprise both have same dimensions, that is 28 mm diameter and 26 mm can length. didnt check weight yet!!!!!
for 2212 i am using 30A turnigy ESC and most probably will be using same for 2826.
i haven't used 2826 yet but i think may have same performance as 2212, not sure!!!!!!
but just for precaution use 40A ESC for 2826!!
cheers
Ashish
@R/C vish
no its not .but kv are same. that is from rcforall.
Thnks kalyan sir.
@ashJR7202
I wanna use this for Mickey rc f-117
http://www.mikeysrc.com/F_117.html
So what motor to use? with what ESC?
I will also be using 1050kv motor.
go for 2212/06, 2200 Kv motor with 30A Esc!!!
r u planning to use 1050kv motor for F117!!!!! dont, u may have to use bigger prop and may not fit in this plane!!!!!
no no 2200kv for f117
http://www.mikeysrc.com/F_117.html
and 1050kv for airtruck
http://rctestflight.webs.com/airtruckinstructions.htm
therefore what u guys are telling that i will have to use two different ESC's for 1050kv and 2200kv. :headscratch:
30A esc will work with both motors!!!!!
but may be little heavy for plane!!!!! but no worries
Ashish
@ashJR7202 but this motor
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=12919
asks for 40A esc.
i wanna use 2200kv for F-117 and there is a 2200kv motor on HK
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=5203
but that is innerunner and thus have no flat mount.
go for 2826, other one is pretty heavy and not for ur purpose!!!
30A ESC is fine 2212. but never used mine 2826, though i think it will be enough, but to be on safer side go for 40A for this motor. but it will be heavy for ur other model!!!
if u want u can try 2212 from rctimer it has got good built quality, but little expensive, but again comes with free shipping!!!!