ANY USED APPLE BOX GLIDER

Just buy the kit and build one! Easy and fast build, will give valuable experience and insights

http://aeromodelsupermarket.com/radio-controlled-model-kit/45-r-c-glider-apple-box.html

Take the valuable advice of the TIGER..... Sanjayrai Sir.....
The Kit costs just over 3500 or so and is extremely easy to build... all laser cut parts.

I am not a great builder of balsa sir... Thats my problem

No better time or model to start then 

Also, if you build it, you will not find it difficult to repair (despite best intentions, accidents sometimes do occur......) 

Fine sir... Then I all buy one from sharma

You will find Mr. Vivek Sharma most helpful; any problems just phone him

Thank u sir

Its an extremely easy to build model.  All you need is a drawing board on which you can spread the drawing and use it as the base to build your model.  Remember to cover it with a polythene sheet so that fevicol does not stick to your plan and you can use the same plan again. The other tolls required are a small hammer with a box of All pins (I use my pliers to put the pins in), a good stiff paper knife and a sanding block...... 

the rest can be managed easily...

Happy Flying