Hey guys I m looking for a 450 size h quad for my fpv . Any other 450 size h quad will also work
Link - http://www.hobbyking.com/hobbyking/store/__35908__Hobbyking_H4_Copter_Multi_Rotor_Quadcopter_Frame_470mm.html (http://www.hobbyking.com/hobbyking/store/__35908__Hobbyking_H4_Copter_Multi_Rotor_Quadcopter_Frame_470mm.html)
http://www.quadkopters.com/product/qk-400-fpv-kit/ (http://www.quadkopters.com/product/qk-400-fpv-kit/)
That won't fit my electronics . Already checked .
What setup you are running? I suggest you design one yourself and get it cut.
Can you tell me how to design ? And from where to get it cut I'm going to be changing the electronics from my hillier 450 quad as it had a bad crash last week and it's a great opportunity for me to start doing fpv
Satya can help you design and do the cutting, he has glass fiber and carbon fiber from which you can make your self designed quad/tri/hex or any other thing.
I made this : http://www.rcindia.org/multirotors/100-carbon-fiber-custom-tricopter-build-(5th-sweepstakes)/ (http://www.rcindia.org/multirotors/100-carbon-fiber-custom-tricopter-build-(5th-sweepstakes)/)
What was the total cost of the frame ?
The frame by itself+8 landing legs+ motor mounts + Camera mount(a lot of stuff :P) = 1305
I bought the carbon booms from RcDhamaka
Wow that's cheap , which software did you use ?
Actually my friend designed it from a drawing I made, he made it in Corel. I Satya accepts CorelDraw.
Can you guys also help me ?
I want to make something like this .
You can get whatever design you like from Satya, my freind isn't around so I won't be able to help with the Corel part.
So if I give this drawing to Satya sir , he will turn it into 3d himself
The QK kit is awsome for FPV. I did the review and its smooth and it flies well.
You can ask him about that.
Can it handle a 10x4.5 prop , I have already asked him , he has told me that he is going to sell it as frame only in a week
No... 10x4.5 is not possible.
Any design needs : http://www.quadkopters.com/cnc-cutting-service/?utm_source=right+banner&utm_medium=website&utm_campaign=cnc+cutting+service (http://www.quadkopters.com/cnc-cutting-service/?utm_source=right+banner&utm_medium=website&utm_campaign=cnc+cutting+service)
So is it possible to put 8x4.5 props on this motor ?
Link - http://rcbazaar.com/products/1905-avionic-c2830-kv850-quad-brushless-motor.aspx (http://rcbazaar.com/products/1905-avionic-c2830-kv850-quad-brushless-motor.aspx)
just see the flitetest h quad build
I want to make one which is of higher quality
why what's wrong with it.
Basically I want a proper one made with fibreglass or carbonfibre
wood is strong too if you want to make it look like carbon fibre get some vinyl which looks like cf.
Quote from: rcrcnitesh on July 30, 2014, 09:48:56 PM
wood is strong too if you want to make it look like carbon fibre get some vinyl which looks like cf.
Making it look like CF doesn't really help any purpose, making it out of CF is not cheap but it is much more durable and light. I do not recommend it to newbies as they WILL crash when they fly and when they do they should be able to spend the least amout of money and least amount of time to repair and hence wood booms are recommended.
For your use(Devang) I suggest that you make a convertible(foldable) H Quad from Carbon fiber if your budget allows or else use Glass Fiber. When you crash a CF quad you won't break something easily,but if you do then you'll need to have spares. Carbon will make your quad light, agile and durable and you can make it make look good and conceal all the wiring easily too.
Is there somewhere from which I can get premodern Corel designs
Dude.. no clue. I made my own. I really suggest you contact Satya! He will help you through.
Ok fine