Hi
I want 6-Ch transmiter, looking cheap 6-ch transmiter
Thanks
Hi,
Do anyone have Turnigy 9x 9ch Transmitter (http://www.hobbyking.com/hobbyking/store/__8992__Turnigy_9X_9Ch_Transmitter_w_Module_8ch_Receiver_Mode_2_v2_Firmware_.html)?
Or hobbyking 4-CH radio, in good (cheap) price ??
i am having one WFLY 6ch transmitter with reciever....3years old ...
hi bhanu
can u plz upload the pic, n how much u r expecting???
i m looking cheap transmitter
I will paste it tommorow original pic of rc now i ll upload pic of its box , i bought it for 6500 rs including reciever , but its antena has loosend so u can buy new antena for that , so for this problem i can give it for you for 2000 rs..
hi
thanks but without lcd it is same as hk transmitter for me
sorry dear not intrested.......
Anyone.....????
I have a brand new KDS-7X 2.4GHz (Mode 2) - :Rs: 5000 + shipping (as applicable)
It can support multi-users and multi-equipment simultaneously, features quick response, high precision and strong capability for anti-jamming.
KDS-7X 2.4GHz system supports one transmitter and several receivers which makes it possible that single radio can control several models simultaneously.
Features:
- LCD display shows model type and battery voltage on normal status.
- 7 channel standard servo signal output
- 5 models parameters store supported
- Support 5 points throttle (THR) curve in NORMAL model and IDLE model
- Support 5 points pirch (PIT) curve in NORMAL model, IDLE model and HOLD mode
- Support Helicopter, airplane, etc.
Specification:
Encoder: 7 channel
Frequency: 2.4GHz
Package Content :
- KDS K-7X 2.4Ghz 7ch Transmitter x 1
- KDS K-8X 8ch receiver With Bind Plug
Bump ??
http://www.rcindia.org/for-sale/hk-450-tt-pro-3d-torque-tube-helicopter-kit-bundled-offer/
We are the company who have over the period of the past few years imported from Chinese manufacturers like W Fly , KDS , ESKY , Flysky etc for radios of the electronic type with or without LCD essentially the programmable types .
The reason we stopped importing the programmable variety of radios from China and stick to only basic radios from China is because they are totally unreliable and unfriendly both in usage and programming .
It is only due to this that we have switched to selling only Branded radios like HITEC from this variety .
Our understanding is that once a person has graduated from the basic entry level radios and decided to take the hobby further then they should invest in a good quality reliable radio which is very critical.
I am talking this being a point of view for a serious RC Modeler not for those choosing cheap alternatives for every thing , for that variety my advice will be if the focus is RC Planes then really a radio beyond 4 channel with a V tail mixer on board will last them a life time for any kind of plane as they are anyway not looking for precision.
eg : I personally would not trust a precision aerobatics plane on any of the Chinese programmable radios in any case after investing a good amount on a quality plane like PA, SEBART etc and putting in other quality equipment .
Further after Investing a tidy sum on a Heli even the cheaper variety I would again not trust it to a unreliable radio with questionable precision .
So in my understanding the Cheaper radios are only suitable for the foamy type aircraft .Hence flying a general purpose foamy including elevon mixing a simple 4 channel with a v tail mixer is good enough as anyway the additional channels and setting are quite pointless on these types of planes .
This is my opinion being one of the persons who has been among the pioneers in dealing in RC Products from China .
My experience in dealing with Chinese products shows that even in the case of products like LIPO's there are a whole lot of manufacturers out there covering a wide spectrum of pricing and quality you have to understand one thing there " PEANUTS : RESULT = : MONKEYS " ;) ;D.
YES we have matured since our early days thanks to various experiences :)