Main Menu

6 Channel Radio

Started by Adiboy, November 06, 2012, 09:27:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Adiboy

Hi friends,

I need a used 6 Channel Radio with LCD Screen 2.4 Ghz frequency for Quadrotor.

My budget is not more than Rs. 3000/-.

Its a kind request to please attach the relevant photographs of the same.

Thankyou...

KALYANPRODHAN

Better go for a new FlySky 9 Ch. with display.
Rs. 5190/- + shipping (Earlier was free shipping) from aeroworks or
Rs. 5250/- + shopping from RCBazaar or

Though it looks 2000/- extra, you can get plenty of options for fine tuning and moreover type approval as well as which will stop your searching till a 5 digit budget for a Tx.
But if you look for a low cost 2.4 GHz Tx/Rx with display and in your budget, you have to wait for any one's sale as very few people can give at that price and with co-incidence having the Radio, as the ratio of giver and taker is very low.
We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.

Adiboy

Kalyan Sir,

Thanks a lot for your feedback... There is also a turnigy 9x available on this budget.... Have you had any experience with Flysky 9x...?

Or if any member has Flysky 9x Please post your reviews and your applications which will help me narrow few things down and collect further funds...

Comparison between Turnigy 9x and Flysky 9x would be an apple pie for me...!

Thanks..

KALYANPRODHAN

Both are basically same in hardware except brand-name and type approval.
Though they need 8 nos of NiMH/Alkeline/ZnCl2 battery, but I recomend to give supply voltage overall 11volt maximum. Better use high capacity NiMH Battery or LiFE battery pack.
You can get turnigy at lower price to some LHSs and/or with lower shipping cost.
But you can also adjust the Tx with attached with PC that hardly requires a display and you can go for a simple 2.4 GHz radio if you really really in a tight budget.

And if you want to fly quad to a reasonable height, you have to go for a pro level Tx with preferably High power Tx and rx.s for costly electronics Justread vineet's quad loss over here. Hope you might understand.
We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.

satyagupta

I have FlySky 9TX and its awesome, as said by Kalyan sir both are totally same (hardware) just the different brand name. The good thing about the 9X, the fine tuninig that comes with it, is such awesome blessing. Earlier i was using a normal HK 6CH tx for my quad, and was having lots of issues, drifts and all. But with this new radio i can fine tune things, trims sub trims, change of MODE etc etc..
one stop for multirotor needs:
www.quadkopters.com

http://www.facebook.com/QuadKopters
https://www.youtube.com/user/QuadKopters
https://www.instagram.com/quadkopters

Adiboy

Kalyan Sir,

Thankyou for the feedback... I will definitely go for a Tx with Display... Cons weigh much more than the pros..!

Satya bro,

Thanks for the info... Please PM me if you have anyone around you to sell Turnigy 9x or Flysky 9x...

sameermaha

i do have one plz pm me if intrested