Text only | Text with Images

RC India

RC Baazar => Wanted => Topic started by: sushil_anand on March 03, 2010, 08:40:58 PM

Title: Brushed ESCs
Post by: sushil_anand on March 03, 2010, 08:40:58 PM
Need two ESCs for brushed motors, 15 & 25A (minimum) rating, with BEC.  New or good condition.

Thanks.
Title: Re: Brushed ESCs
Post by: gauravag on March 04, 2010, 01:02:48 PM
I have a Great Planes Electry fly C-10 ESC with a brushed/geared motor ( i guess 280 size ) .
Please advise if interested.
Title: Re: Brushed ESCs
Post by: sahilkit on March 06, 2010, 08:36:37 PM
why not build one yourself ? i built a lipo version sometime back n works fine other than weight (since u are from Mumbai u should have access to all kinds of exquisite power fets not to mention access to SMD micro-controllers parts etc)   :)
Title: Re: Brushed ESCs
Post by: mohan on March 31, 2010, 05:38:33 AM
I have a brushed ESC that came with a RTF model. Changed to brushless set up after the brushed motor gave way after crashes. Let me know if you need the same.
Regards...
Title: Re: Brushed ESCs
Post by: sushil_anand on March 31, 2010, 10:47:36 AM
QuoteI have a Great Planes Electry fly C-10 ESC with a brushed/geared motor ( i guess 280 size ) .
Please advise if interested.

Gaurav

My apologies. I missed this somehow.

Thanks for your offer but I would have needed an ESC for a 550 motor (that's what came with the ARF glider).


QuoteI have a brushed ESC that came with a RTF model. Changed to brushless set up after the brushed motor gave way after crashes. Let me know if you need the same.

Mohan

Thanks to you too. Again, I feel that this would have been inadequate for the size of motor.


Title: Re: Brushed ESCs
Post by: VC on March 31, 2010, 10:55:09 AM
Have you checked RCforallin? I saw something there but I couldn't figure it out.
Title: Re: Brushed ESCs
Post by: sushil_anand on March 31, 2010, 11:08:32 AM
I did. They have one but it is much too expensive. It would be cheaper to replace the motor as I have  brushless ESCs already. The only problem with this solution is that a folding prop that has been supplied with the gear box and motor as part of the kit. The prop back plate mounts onto the shaft with a steel wire going THROUGH it (the shaft).

Don't want to drill the shaft of the BL motor I have.

HobbyKing to the rescue, I suppose!
Title: Re: Brushed ESCs
Post by: sushil_anand on March 31, 2010, 11:24:55 AM
Quotewhy not build one yourself ? i built a lipo version sometime back n works fine other than weight (since u are from Mumbai u should have access to all kinds of exquisite power fets not to mention access to SMD micro-controllers parts etc)

Thought seriously about this. Parts ARE easily available here and inexpensive too. A BUZ 11 costs only RS. 15! Just felt that the effort is not really worth it in terms of time as I would like to assemble it on a proper PCB for reliability.  A new one costs USD 8 and I will be using this for a very limited time.
Title: Re: Brushed ESCs
Post by: ankur on March 31, 2010, 01:44:03 PM
can someone tell me how to build one
i want to build a 3A one and 5-8A one
Text only | Text with Images