Main Menu

cox engines

Started by Nehutech, April 25, 2012, 11:47:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Nehutech

Any source of cox engines in india
Specktrum DX6i l EasyStar l Cabin Cruiser 46 l

Turnigy GTX3 l mSP 190 Micro Heli l HengLong Mad Truck l Kyosho TR-15 Roller

Nehutech

Specktrum DX6i l EasyStar l Cabin Cruiser 46 l

Turnigy GTX3 l mSP 190 Micro Heli l HengLong Mad Truck l Kyosho TR-15 Roller

spitfire

If you want diesel engine checkout Sharma aero models

punty

Which cox do you need friend?

Nehutech

hi

i need cox .045 engine as i m new to engines, i have to learn more to engines. so want to buy small engine for the test flight.

Specktrum DX6i l EasyStar l Cabin Cruiser 46 l

Turnigy GTX3 l mSP 190 Micro Heli l HengLong Mad Truck l Kyosho TR-15 Roller

punty

There are loads of good offers on ebay usa.. I doubt if there's a .045 however there is .49 which is available. I did buy one which is unused so far, so if its urgent I can sell it to you. mine is without any accessories.

But if you have time and plenty of patience you can have a look at  "http://stores.ebay.in/xenalook"  this is the biggest cox engine store I came across ebay.  I would suggest you go for this http://www.ebay.ca/itm/Cox-049-Model-Airplane-Engine-049-Ultimate-Combo-w-Tank-Prop-Spinner-/390370583282?pt=Radio_Control_Parts_Accessories&hash=item5ae3e662f2 it appeared to be best deal to me.  And yes please do make sure that you model is capable enough for this one before you purchase anything.

Finally I would advice you to please do seek advice from expert / senior members in the forum before you make any decision. I just posted this as I had done a lot of homework on this one earlier, so it might save you some time.

Best Regards
Punty

gauravag

I doubt you will find a good deal here on these engines. These engines are marvels of engineering, and since out of production, extremely hard to find one. Those who have also  might not be willing to part with them.

With the low cost of electrics in this power range, and the considerably less hassle, i would suggest you switch to electrics for your project.

Pradu

I have some get in touch with me , please check olx