Hi Guys,

I'm looking for these products,
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_46&products_id=814
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=3_46&products_id=815

I contacted RCD and RCB, but I'm not getting any replies from them regarding when they will be available for purchase.
Can anyone let me know where I can buy similar product, or does anyone have these kind of products.

Thanks in advance
Abhishek

jjaaxx44,

Those models are of advanced and hardcore 3D flyers,
if you want to build profile planes you can get depron sheets, cut and stick and fly according to your flying skill
check rcgroups scratch build thread for plans

Hi Jatayu,

I actually built one out of depron 5mm sheet (RCPowers Extra 300S) see image. Flown it couple of time myself, b4 my wife crashed it.
I'm looking for readymade, as I'm not a very good at cutting, I had to sand down errors, and took me almost a 2-3 weeks to finish it. As I work in IT industry...

IT industry = 5 day week = 2 days fly time!

Profile airplane are not for beginners, tho it might be a lil cheap in building and
can write off a crash without cribbing!

haven't seen a perfect depron cutter till date except those CNC's
try untill you get it right.

stocks in LHS takes upto a month to land as it has to be imported just give them a call to know
approx time.

hmmm....

just make the plane wing much wider so that it can glide well and you will not crash your plane ............

@jayantpradhan: for Extra 300S wing span was ~1 meter and was flying pretty good.

@Jatayu :  I'm just a bit confused why is pre cut depron components are for advanced users.
Where as I did the same thing by making Extra 300S. I bought depron>printed of extra 300s plan>cut>hot glued>added electronics and flew it.

1st flight i crashed within 20sec, it got damaged but i mended it within 30-40 mins,
After i got simulator, flown few planes on simulator for a week or so and I was good to go.

Electronics I used,
30amp ESC, 1300KV brushless, 8x6 SF(used), 6x4 E(for testing), 5x5(for testing), 3c 2200mah and 2c 1100mah, Fly Sky 6 channel 2.4 GHz Transmitter and Receiver, 9gms and 5gms servos.

P.S.: Yups two days holiday But RC is one of the hobby which I just entered, I do Photography, Fish keeping, Trekking... Hope you understand why I'm looking for pre cut.....

dude use 2200kv motors 250 size with a 35a to 40a esc... i always use these for my every plane...... works superb.... if your plane is more than 450g then use 450 size 2200kv motor.............