ch6 receiver is not blinking at all ......not binding with tx...how can i know that which part is working wel and which is not

Hi,
   what kind of transmitter/ receiver you have, if you can able to share me the model name, i can help you.

yes.....whynot.....avionic 6ch tx rx

I you have an esc with a bec, connect a battery to it and connect the esc in channel 3 of RZ6 reciever. If the light flicks then the reciever is ok.
Unplug the battery from esc,
In your transmitter go to bind option and select it,
Press the bind button on reciever,and  connect the battery,
You have to keep pressing the bind button while connecting the battery. After that release the button, unplug the battery, switch off transmitter.
Then switch on transmitter and connect the battery to see  if the rx is binded to the tx.

ya i did it but receiver is not showing any blink ot light

light is not flickering...

check this video else check this

keep your receiver 50cm away while Binding, if you still find the receive is not binding, you need to return approach the RCBazzar in person.

yes i watched those videos and did all procedures properly but not working

what should i do...

Are you sure that you have an esc with built in bec?
Cause if not, the reciever is not getting power. You need 5v to power it, and an esc with built in bec(battery eliminator circuit) does that.

yes tushar

You should talk with rcbazaar for this matter.

ok

Try a different LiPo. If nothing happens, try with another RCB 6i Reciever. If nothing works, ask RcBazaar