FTDI to USB cable for minimosd programming

Started by arun21, December 13, 2014, 10:56:05 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

arun21

December 13, 2014, 10:56:05 PM
Wanted : FTDI to USB cable for minimosd programming
Talon uav - BIXLER 2 -  PILATUS Porter
TURNIGY 9xR - RangLink
5.8 - DIVERSITY
APM 2.6 - GPS - Mav Link - GCS

sooraj.palakkad

#2
December 14, 2014, 09:03:20 AM
If you have an arduino board, you can use it's a USB to UART converter for programming your minimOSD.

You just have use the Rx, Tx ,Reset, Vcc, GND pins to connect to your programming pins on minimOSD.

A detailed how to is written by Oscar Liang :

http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB4QFjAA&url=http%3A%2F%2Fblog.oscarliang.net%2Fprogram-minimosd-using-arduino-without-ftdi-cable%2F&ei=XwONVMHqBNGiuQTww4GwDg&usg=AFQjCNFWTicHf81jRZk2borHbKk2rO1vfA&sig2=Gov9hi6UPoUjaovDYnF5HA
RC Hobbyist and an Aerial Cinematographer..
Print
Go Up Pages1
User actions