want DIY V939 Quadcopter Kit from quadcoptors.com

Started by roby, January 10, 2014, 07:29:38 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tej

looks like a good deal but its 230 size! Much smaller than 330 and 450! I doubt it can be use for fpv in future but you can use the electronics in f330 quad frame which you can buy at hk for 8$ for fpv

If you don't want for fpv then it's a good deal for small quad! Get it!

roby

thanks.. and there's no programmer available with this quad..right?
so will i be able to fly it with my rcb6i?

sry if the question seems inappropriate, i dnt have much knowledge.

tej

of course you can, its plug n play. you have your receiver right? plug the receiver with the board

but there are some setting to need to program before start. This board can be used in x/y/+ configurations so if its programmed then good. Discuss this with the vendor before buying!

roby

i will. and it should be set in x config i guess.. right?
how do we make connections? like pin 3 is of throttle, so will it lift the quad?
and elevators?

tej

If it's programmable then you will get a usb to connect it with you pc and you can download software to set it! ASK your vendor as it says lite version, it might be preprogrammed only for x mode!

rcrcnitesh

If you want to build a quad and not do this one it is great I made the frame it is very strong just waiting for the elecs. If you want to build even a larger one than this use A3 Size paper and if you want it to be even stronger put some hardwood dowels or cf rods or tubes of the correct size measure the thickness of the gap and get a dowel of that size.
You will face trouble rolling the Sheet for that you can use that dowel or use some barbeque sticks for rolling.

part 1
http://www.flitetest.com/articles/first-origami-quadcopter-for-less-then-20-cent

part 2
http://www.flitetest.com/articles/first-paper-quadcopter-part-2-the-electronics

youtube part 1


youtube part 2
Maker | Aeromodeller | Teenager

roby

oh thank you nitesh sir, it was really helpful.

and also if anyone knows how to connect receiver to a very basic model which is not programmable please let me know