Greetings to everyone!

I'm in urgent need of any aqua prop to suit either a 300 or 400 sized brushed motor. Dont know much about aqua props, can anyone spare a few.Need it by Monday...

Something like this http://www.hobbyking.com/hobbyking/store/__7358__Turnigy_4mm_AquaProp_31x22x14mm_.html

Thank you

here you go  hobby shop has it...!

http://thehobbyshop.in/index.php?main_page=product_info&cPath=3&products_id=2

i happen to have a few of those props
i would be glad to lend them to you...

Jatayu, can make our own marine prop with aluminum lid, or from brass sheet. for 300 or 400 motor, 1.5 to 2 inch dia is enough.and for a high speed operation, can make flat bladed one, with less pitch, to avoid cavitation, and can go with steep pitch with slow, but with torque.we can make a prop in easy, and can adjust the pitch according to our needs, will works excellently. a three bladed one will works great, and the props with coarse pitched will need ample of rotational torque.if you are going to make a high speed craft can fix motor directly. and if you are looking for a long time running with slow specs, can add a current limiter up to 1, or 1.5 amps. so a 5 amps battery will give you lots of running time. in salt water a prop cut from a brass sheet will be good.

Quote from: R/C vish on September 13, 2011, 11:39:05 PM
here you go  hobby shop has it...!

http://thehobbyshop.in/index.php?main_page=product_info&cPath=3&products_id=2

thank you vish but its out of stock here since a week, thats why i posted under wanted thread...

Quote from: @k@sh on September 14, 2011, 09:14:48 AM
i happen to have a few of those props
i would be glad to lend them to you...

Awsome:) Check PM...

Quote from: roopeshkrishna on September 14, 2011, 08:18:47 PM
Jatayu, can make our own marine prop with aluminum lid, or from brass sheet. for 300 or 400 motor, 1.5 to 2 inch dia is enough.and for a high speed operation, can make flat bladed one, with less pitch, to avoid cavitation, and can go with steep pitch with slow, but with torque.we can make a prop in easy, and can adjust the pitch according to our needs, will works excellently.

Will make this tomorrow right away!
Thanx a lot for the expert advise sir! Hope to get more from you...

Hi Jatayu ,
Which boat are you planning to make.What is the motor and drive that you intend to use.
Do share your boat plan

Shreekant