Need electric RC car to use in Project :
Requirement:
R/C car where the receiver is not integrated into the ESC motor.
The servo should use a 3-wire connector.
Brush Motor
ESCs have 2 wires on one side to connect to the battery; on the other side, they’ll have 3 wires for speed control (which goes into receiver )
Some thing similar to 1/16 2.4Ghz Exceed RC Magnet EP Electric RTR Off Road (see below link)
https://www.amazon.com/2-4Ghz-Exceed-RC-Magnet-Electric/dp/9269803775/ref=pd_sim_147_2?_encoding=UTF8&pd_rd_i=9269803775&pd_rd_r=XBE8BZRGZ8FRFJJGQ2EV&pd_rd_w=eildF&pd_rd_wg=f1rwv&psc=1&refRID=XBE8BZRGZ8FRFJJGQ2EV
http://www.rcindia.org/for-sale/sale-used-116-brushless-4wd-mini-rally-car-with-hk-gt-2-2-4ghz-2ch-tx-rx/ this is one link, you may find some other cars for sale as well in the sale thread. Or else you can try modelart cars they are a little bit cheaper and i guess ll be good enough for your project.
You could buy the one you suggested,why go for alternatives?