need prop adapter with threaded hole for spinner

Started by zonuna, March 02, 2012, 03:30:18 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

zonuna

I urgently need a prop adapter for 5mm shaft motor with threaded hole for fitting spinner. I cannot find it anywhere among an RC online shop, I would be glad if anyone can inform me where to buy.



SunLikeStar

Very difficult to find the adapter alone but there is one thing you can do. I'm not very sure what you are trying to do. but if you just want that adapter then you can buy a folding prop spinner from rcbazaar and use the adapter. here is a spinner with 5mm adapter.
http://www.rcbazaar.com/products/110-folding-spinner-40-x-5.aspx

zonuna

SunLikeStar  this might be a good idea, I need this adapter cause I over tight and broke my new Sbach adapter ;-/

zonuna

Like I have mentions before, I had break the prop adapter, due to over-tight, dont know where i can buy this adapter
so I have upload the photos so that somebody out there might help me find it.



zonuna

is there anyone kind enough to show/guide me where i can buy the above spare parts, it for 4250 brushless outrunner 800kv
I cannot use a shaft prop adapter type, as the model does not allow me  :help:

AEROVISHWA

i have one of this type.... pm me your address will send you one....

it has a bit of  arildite on it.... u may have to clean it.. and also one thread on  the top  slipped..  but will work  fine...!


this atleast reminded that i had to send some people what i promised..!
Aerodynamics are for people who can't build engines.
-Enzo Ferrari

https://sites.google.com/site/vishveshkakkeri93/
HAPPY LANDINGS