Main Menu

Need RTF 3 channel Plane

Started by Ronak, April 06, 2018, 12:32:51 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ronak

hi,

i need 3 channel RTF plane.  (If micro plane then well and good)

Please contact me if anyone has.

Thanks

Ronak


K K Iyer


Ronak

Sir,

3000 Max

Any possibilities?

A complete RTF.

prabal276

You budget's too low in my opinion. Even for a micro.
You may find a two channel I/R Cessna online somewhere for that sort of budget. Even if you manage to find a parkflyer, it will have non-reusable components. A small all-in-one circuit board. You can put them in another small airframe if you damage the original airframe.

Make the budget about 12000. That's the initial cost for getting started with RC planes. After that, making a new plane isn't very expensive. You can reuse the components.

Regards.

rcrcnitesh

Prabal one needn't spend 12000 for getting into RC man. One can do it for as low as 7-8k. Don't scare the newbie away.
Maker | Aeromodeller | Teenager

prabal276

@ rcrcnitesh
I always advice people to get quality equipment.
I did get all my equipment for 8k initially but then, I ended up regretting it. What's the point in getting useless lipos and cheapo plastic transmitters.
You'll then have spend extra after few months when you get fed up of the limitations of your equipment.
So isn't it better to save some expenses and get quality gear?
If the person is unsure about getting into the hobby, he can surely make the decision without spending even a penny by going to visit a local flying session.
Sorry if I have scared anyone.
Regards

rcrcnitesh

You do have a point but I still believe one can get quality gear for max 8-9k.
I'll post a list if I can.
Maker | Aeromodeller | Teenager

K K Iyer

Quote from: Ronak on April 07, 2018, 02:14:52 PM
Sir,
3000 Max
Any possibilities?
A complete RTF.

As Prabal said, RTF not possible in 3000. Toy grade maybe, but not hobby grade.

Don't know if you're aware, but just 2 lipo batteries can exhaust your budget.
If you already have a 4-6channel radio, motor, props, prop adapter, Esc, lipos, charger etc, and need only a bare airframe, it can be done within your budget.

Please indicate what equipment you already have.
Then we'll see what else you need and how much it'll cost.
Regards