NiMH battery charger

dODo · January 25, 2011, 12:08:45 AM

hi guys
i needed a charger for my rotostart battery
6-9 v and 600mah
any suggestions??

abhay · January 25, 2011, 12:12:50 AM

Same here dude,
I have Tx batt(NiMh) 9.6 v 700 mah. Confused with charger, as it is dangerous to charge with constant current as per wikipedia.

anwar · January 25, 2011, 12:25:32 AM

Any one who is getting into RC seriously should get one of the 50W all chemistry chargers (unless funds are really tight!).

abhay · January 25, 2011, 12:28:39 AM

Hello anwar sir,
what's that 50 W charger.
whom should i contact 4 it? Where will i get details?

anwar · January 25, 2011, 12:40:34 AM

Any brand, including the Accucel 6, ECO 6, Thunder AC6 etc.

dODo · January 25, 2011, 10:00:25 AM

any quick measure??
i have a car to run but dont have a charger to charge the rotostart

vinay · January 25, 2011, 10:16:03 AM

A decent charger will cost you a minimum of 1250 rs for 50 watts. From what I know you can use a 9V adapter with approximately 100 to 150 mah output and charge for 4 hours for a 9 v battery, for 6 V you may need a 6 V adapter. variable volt adapters are also present. But again if you forget to switch it off, it keeps going bad or explode in rare cases.

Wait for more answers.

mail4ajo · January 25, 2011, 06:13:07 PM

I have one that I can give away cheap since I am not using it anymore. Works for all NiCD and NiMH batteries. Can charge 2 at a time. See this link:

http://www.rcindia.org/for-sale-completed/used-gt-escape-charger-nimhnicd-dual-charger-rs-2300-(free-shipping)/msg39896/#msg39896