Print Page - Qaud Copter board (HOBBYKING)

Title: Qaud Copter board (HOBBYKING)
Post by: viswanath on November 23, 2011, 01:56:34 PM

Hi,
I want to buy the quad control board mentioned in the website. (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=19534)

But i will be using 4 1250 KV motors with max current 55 A and continuous current 45 A with input voltage of 6-14.8 volts.
We will be using 4 60 amp Avionic ESC's with 4 cell LIPO's.

Please let me know if i can use the board for the given configuration.

Title: Re: Qaud Copter board (HOBBYKING)
Post by: sudhir31 on November 23, 2011, 09:37:59 PM

Yeah u can use any esc and any motor with this board.

Title: Re: Qaud Copter board (HOBBYKING)
Post by: Dharmik on November 23, 2011, 10:40:08 PM

just make sure you supply 5V only.

Title: Re: Qaud Copter board (HOBBYKING)
Post by: sudhir31 on November 24, 2011, 03:22:54 PM

any way he'll be having a esc with bec ,so there will no problem and as per the pic in hobbyking there no provision for external supply except from the programming port.
it is better to have a bec

Title: Re: Qaud Copter board (HOBBYKING)
Post by: Dharmik on November 24, 2011, 04:00:40 PM

what i am trying to say is he has to disconnect red wires from 3 esc to supply 5v.

RC India

RC Baazar => Wanted => Topic started by: viswanath on November 23, 2011, 01:56:34 PM