does any one out there know, where can i get suited bearings for FC 28-22 brushless outrunner motors? :-\
i busted mine on my quad
did you try PID tuning or still it tilted towards one direction?
Checked all the receiver zeros?
oh i figured out that the vibrations are causing that problem....so when i went to fix the vib issue, i fount out that 3 motors are busted....in other words the bearings are worn out and the bell of the motors is sloppy and moves around a little bit...that is causing the vib and i need to fix that ASAP
rc bazaar have a lot of bl motor bearings - take your motors shaft
size(probably 3mm) od and thickness of the bearings and get suitable
replacement.
They are one of the better LHS
rc bazaar have a lot of bl motor bearings - take your motors shaft
size(probably 3mm) od and thickness of the bearings and get suitable
replacement.
They are one of the better LHS
but what about the outer diameter of the bearings??
yes the shaft is 3mm
http://www.foxtechfpv.com/tmotor-2814-bearing-p-669.html
Buy these.
High quality :)
oh thank you mate!
now i have to see whether is there on rcbazaar or not
http://rcbazaar.com/category/167-motor-shafts-bearings.aspx?pageindex=1
rcbazaar doesnt keep it....dammn!!
What size prop adapters are u using?
Edit- I'm using same motors with over 15 crashes on concrete . Never has vibration issues. Or bell problems but I did have bell problems with odin2210 which is similar. I have shortened my shafts though.
3mm colet adapters
Reduce the shaft length to just enough, leave no extra. It will help to avoid vibrations later. I can search for bearings locally. I need to get some too. Will let u know if I can find it here.
sure sir,
is the size of bearings is 4x8x4??
I dnt knw the size exactly. I have same motors so il take out from them and measure. Please dnt callme sir. Bearing ID is 3 mm obviously .
okay !! bro !
Aditya get some 3x8x3... will fit good.. you can get in hk.. 450 heli spares... search for bearing and choose the perfect one 4 PC's for $1.3
:)
Sent from my Canvas using tapatalk 2
i want to buy them locally ...stuff from abroad will take a hell lot of time to arrive
Take the samples and go to a Bearing Dealer
yeah ! but exams are on....damn!
The smaller (common 3X6X2.5) bearing is the front bearing located under the can. The rear bearing is a 3X8X4 higher capacity bearing.