Main Menu

transmitter lipo for fs-t6

Started by kamalsahai, March 02, 2016, 08:55:47 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

kamalsahai

wanted lipo for my fs-t6 transmitter. Hobbist/ individual or LHS may respond

kp

Balakrishna Reddy

there is no lipo for that transmitter better buy three Li-ion batteries from any store and connect them in series and connect. It works great for me. Far better compared to any other rechargeable batteries.

a3ruz

How do you charge them ?
Hows the battery life ?
It's all about beging in air
CT6B | HK Bixler | APM | S550 | Tarot XYZ M | Turnigy 9x | Naza M V2 | Phantom 2 | Phantom 4 | Taranis X9D+ | F450 | ZMR250 | Naze | Omnibus | Martian II | Airypix | Airytek | Drone Racers Kerala

a3ruz

Quote from: kamalsahai on March 02, 2016, 08:55:47 PM
wanted lipo for my fs-t6 transmitter. Hobbist/ individual or LHS may respond

kp
I suggest you to measure the battery bay of your tx and search for LiPo with that dimensions . you may find one , also Google for a suggestion it can easily lead to the solution
It's all about beging in air
CT6B | HK Bixler | APM | S550 | Tarot XYZ M | Turnigy 9x | Naza M V2 | Phantom 2 | Phantom 4 | Taranis X9D+ | F450 | ZMR250 | Naze | Omnibus | Martian II | Airypix | Airytek | Drone Racers Kerala

Balakrishna Reddy

I build such that it is same as commercial lipo batteries with 4 pins out for a 3S battery to check voltage .I use those pins to charge my battery. And the battery life is really good. i use 1100mah batteries .
It will improve if i use better batteries.

ericjohn007

Hi,

I have done the Lipo Mod for my FS-T6.
The Wolfpack 2200mah Tx lipo fits the bay perfectly.I have just soldered the leads of a JST male connector to the 2 battery terminals and this plugs into the Lipo with ease.

Works Brilliant as per me.

jovino

Ericjohn077 ..... can u click and  send a  pic of it

ericjohn007



Can you see the picture ?

Sent from Tapatalk

a3ruz

I think he asked for the pic of your battery n it's arrangement in bay ,
Not the pic of battery bay
It's all about beging in air
CT6B | HK Bixler | APM | S550 | Tarot XYZ M | Turnigy 9x | Naza M V2 | Phantom 2 | Phantom 4 | Taranis X9D+ | F450 | ZMR250 | Naze | Omnibus | Martian II | Airypix | Airytek | Drone Racers Kerala

ericjohn007


a3ruz

That's it @jovino battery available at rcbazaar.com
It's all about beging in air
CT6B | HK Bixler | APM | S550 | Tarot XYZ M | Turnigy 9x | Naza M V2 | Phantom 2 | Phantom 4 | Taranis X9D+ | F450 | ZMR250 | Naze | Omnibus | Martian II | Airypix | Airytek | Drone Racers Kerala

jovino

Thank u very much  a3ruz

jovino


Rathi

u might as well take it out directly from the power cable inside the module. just open the radio and solder the JST/ Deans connector with wire instead of soldering each port. saves time XD
Bolt 210
QJreaper 6"
taranis 9XD+
its either FPV or nothing.