RC India

RC Baazar => Wanted => Topic started by: atul_pg on June 04, 2011, 12:40:15 PM

Title: Turnigy 9x - Transmitter Lipo
Post by: atul_pg on June 04, 2011, 12:40:15 PM
Hi Guys,

Am looking for either one of the two lipo's as below -

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=14076

or

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=7346

I guess these are the lipos that would fit the turnigy 9x. Let me know if anyone or LHS has it .

Thank You

Atul G.


Title: Re: Turnigy 9x - Transmitter Lipo
Post by: sunk? on June 04, 2011, 02:27:44 PM
hi atul_pg,
as a safe guard befor you buy............. double check the given battery dimentions............... I got one that was supposed to be for the futaba and it was too thick. I could not get the battery cover back on with the supplied battery,
It may have been a 'cheapy' .........a right volts battery with 'light wieght' leads but the volume was too much.
regards
don
Title: Re: Turnigy 9x - Transmitter Lipo
Post by: CrazyPilot on June 04, 2011, 02:28:06 PM
use this one instead as u wont have to modify the battery.

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6955
Title: Re: Turnigy 9x - Transmitter Lipo
Post by: atul_pg on June 04, 2011, 02:48:39 PM
Hello Don,

Good to hear from you.. Hows bristol doing ? Totally missing that place.

I will make sure that I find the correct lipo :)

Hey crazypilot - Its in backorder man. Any LHS stocking it ?

this would fit correctly to the turnigy 9x ?
Title: Re: Turnigy 9x - Transmitter Lipo
Post by: azhaguvel on June 04, 2011, 02:59:46 PM
Anything which is of this dimension will fit I guess.

100mm x 27mm x 33mm
Title: Re: Turnigy 9x - Transmitter Lipo
Post by: atul_pg on June 04, 2011, 03:03:29 PM
Thanks azhaguvel,

This is the link that you gave me - http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=14076

Unfortunately all these lipos are in back order..
Title: Re: Turnigy 9x - Transmitter Lipo
Post by: azhaguvel on June 04, 2011, 03:13:53 PM
I would suggest wait till it comes to stock again. Others get charge to 12.6 V which is very high volts for a tx so you need diodes which inturn eats up your power in the form of heat reducing the time to use tx.
Title: Re: Turnigy 9x - Transmitter Lipo
Post by: sunk? on June 04, 2011, 07:30:37 PM
hi mate,
Bristol much the same ;)
but the weather is so changable last 2 months very windy and dull a lot of the time.
regards
don
Title: Re: Turnigy 9x - Transmitter Lipo
Post by: CrazyPilot on June 08, 2011, 10:35:39 PM
Quote from: CrazyPilot on June 04, 2011, 02:28:06 PM
use this one instead as u wont have to modify the battery.

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=6955

sorry for that. u will have to modify this one as it has different connector.