WANT a CO PILOT or AUTO STABILIZATION SYSTEM fr my 4 ch electric and nitro plane

Started by paladugu_sujith, December 27, 2010, 11:40:30 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

paladugu_sujith

hello

i need a used or a new co pilot or flight stabilization system..

kindly let me know if anyone interested in selling.

regards
sujith

mohan

I have one of these, used only for a couple of flights - Futaba PA-2 Pilot Assist Link Auto Pilot. Brought this from Tower Hobbies. http://www.futaba-rc.com/radioaccys/futm0999.html
Paid Tower Hobbies $63.79 with shipping. Will let it go for  :Rs: 2500.00 + shipping ;D. Pictures attached.
Requires almost no modifications - just one discreet 10 mm hole in the fuselage bottom for sensor mounting.
Draws only 5 mAh from your 4.8V receiver NiCd...no additional battery needed!
Releasing the transmitter sticks allows the PA-2 to take control.
Optical sensors read the difference between light (sky) and dark (horizon), then automatically adjust pitch and roll to stabilize the plane.
Moving the transmitter sticks puts you back in the "pilot's seat."
Adjusts to be as sensitive as you like.
Setting can be changed during flight using a 5-channel radio - anywhere from 0% (take no action) to 100% (for maximum stability).
"Maximum" is perfect for trainer pilots - does not replace a flying instructor, but DOES boost your confidence at the controls.
With a 4-channel radio, the PA-2 sensitivity can be adjusted on the unit.
SPECIFICATIONS
Power Requirement: 4.8 Volt (NiCd Battery)
Current Drain: 5 mAh (at 4.8V)
Amplifier Length: 2.1 in (54 mm) (excluding protruding parts)
Width: 1.3 in (34 mm)
Height: 0.6 in (15 mm)
Weight: 0.9 oz (25 g)
Sensor Diameter: 1.3 in (33 mm)
Weight: 0.5 oz (15 g) (excluding screws)
Baner Aeromodellers Association Pune.