Hello guys,

I am new to rcbazaar, hence would need ur help in building my quadcopter.. i have bought couple of items so far :-

1. EFLITE HP6DSM 6-Channel 2.4GHz Transmitter, 2.4GHz DSM2
2. 8×4.5 Propeller Set Black.

What other parts would i need ?? i need the name and price list of the parts.. (controller board, motor, receiver, Lipo's n charger etc.)

4 of these motors:

http://www.rcbazaar.com/products/1483-odin-2210-kv1200-thrust-810-gms.aspx

4 of these ESC's:

http://www.rcbazaar.com/products/806-avionic-20amp.aspx

This Battery:

http://www.rcbazaar.com/products/1266-wolfpack-2200mah-20c-111v.aspx

This Frame:

http://www.rcbazaar.com/products/1823-hiller-q450-kit.aspx

This Charger:

http://www.rcbazaar.com/products/992-wolfpack-b3ac-2s3s-compact-charger.aspx

This Control Board:

http://www.rcelectro.com/hobbyking-kk2.0-multi-rotor-lcd-flight-control-board

You could change your Props for 2 Black and 2 of a different colour - I will explain that later.

Check with RCBazar for compatible Prop Adaptors for the Motor and Props. Other than all this, you will need a soldering iron, silicon wires, battery connectors and bullet connectors for your ESC to motor connections.

You can figure out the prices from this list. Hope this helps.

Regards.

hey thanx man for the update

i would like know if i can use hobbywing quattro in this project will it be cheaper rather than buying 4 seperate ESC's?? and what reciever i should use for EFLITE HP6DSM 6-Channel 2.4GHz Transmitter, 2.4GHz DSM2?

i order the props as set.. i received only one pair 1 prop clockwise and one counterwise i need to order another pair

Is this prop enough to lift my quadcopter or i choose the inappropriate one (8×4.5 Propeller Set Black)?

This prop is enough to lift the Quad, however, you need 2 X Clockwise and 2 X Anti Clockwise rotating props.

hi,

sandeep from pune, can help you build quad.

call me on 9175342600

regds

i have ordered another pair of props.. 8x4.5 set (green). I am still waiting for my transmitter from USA.. i hope it clears the custom check..

hi sandy, hw r u ? sorry i couldn't speak to u as my phone was not with me.. i work for ibm daksh (yerwada pune) i will call you in the daytime thanx

Hello VC sir,

i have received my 4X Odin 2210 KV1200 (Thrust 810 gms) motors.. but there is a problem it doesnt fit on the motor mount of the F450 frame (screew holes doenst match) what to do need help?

Zip ties is the best option for you,they are great,sturdy and i have used them in many projects,just pass them through the mount and tighten them

Priyum, Its not a bell motor hence its difficult to use cable ties.

@subbu46, it would be better if you can make your own custom mounting plates using either 2mm aluminum or wood.
Something like the one in the pic.

Oh didnt know about that,just provided a solution being my experience but still veloci sir's idea is also great

thanx for the advice veloci sir and priyum sir, The mount holes on the frame are wider than the mount holes on the motor.. can i get a ready made mounts ?? what size adaptor should i go for ?

Its a Q450 frame (Motor Mount Bolt Holes: 16/19mm) and Odin 2210 KV1200 not sure but the diagonal distance is shorter than that on the frame...

It is a BELL motor. Follow Priyum's advice then!  
P.S - i mistook it to be 2213 instead of 2210  

Haha no worries veloci sir,go for it subbu,zip ties are great,see veloci sir's image for reference.

I wasn't confident about this zip tie technique till I saw Pravesh's Quad. I think it is a great idea. I would request Pravesh to post a few detailed pictures of the way he has used zip ties on his motor mounts.

Hi, I dnt have that quad with me anymore and no pics also. But there should be some pics into quad thread http://www.rcindia.org/index.php?topic=12756.new;topicseen#new

Zip ties are best for learning as u dnt damage parts as much in case of a crash it Will just pop out.

Got most of the parts for my quad build just need help in finding few more parts :-

Parts Required :-

1. KK2 Flight LCD Controller Board
2. 4X 20A ESC's
3. Power distribution board
4. 3s 2000mah or 3000mah
5. Charger for 3s batteries

Quote from: subbu46 on August 08, 2013, 01:49:04 AM
Got most of the parts for my quad build just need help in finding few more parts :-

Parts Required :-

1. KK2 Flight LCD Controller Board
2. 4X 20A ESC's
3. Power distribution board
4. 3s 2000mah or 3000mah
5. Charger for 3s batteries

I have all the above items.

Contact after 6pm at 9004548889

hello frnd.............. even i m new at making the quad copter can u give me the link for all the parts which r cheap because i dont have much budget.....................plz help.....

Quote from: ashley correa india on December 23, 2013, 09:54:49 AM
hello frnd.............. even i m new at making the quad copter can u give me the link for all the parts which r cheap because i dont have much budget.....................plz help.....

Quote from: subbu46 on August 08, 2013, 01:49:04 AM
Got most of the parts for my quad build just need help in finding few more parts :-

Parts Required :-

1. KK2 Flight LCD Controller Board
2. 4X 20A ESC's
3. Power distribution board
4. 3s 2000mah or 3000mah
5. Charger for 3s batteries

Please Check for your require parts

3s 2000mah or 3000mah
http://www.rcproduct.in/batteries-accessories/15-zippy-flightmax-4000mah-3s1p-20c.html

http://www.rcproduct.in/turnigy-lipoly-batteries/17-turnigy-2200mah-3s-20c-lipo-pack.html

http://www.rcproduct.in/turnigy-lipoly-batteries/26-turnigy-2650mah-3s-20c-lipo-pack.html

http://www.rcproduct.in/zippy-lipoly-batteries/25-zippy-flightmax-3000mah-3s1p-20c.html


KK2 Flight LCD Controller Board
http://www.rcproduct.in/multi-rotors-parts/12-hobbyking-kk20-multi-rotor-lcd-flight-control-board.html

Turnigy 4206 530kv Brushless
http://www.rcproduct.in/multi-rotors-parts/24-turnigy-4206-530kv-brushless-multi-rotor-motor.html

hi......................reproduct and thanx for reply but can i get a link for a cheap flight controll board..............plz because its out of budget...............plz

hi,
Ashley

It is a New Flight control board and never used like others..

Thanks.

Hi,
Rcproduct
Actually I can't buy such high price board because I m not having so much money to invest on it......so plz if u have any cheap board or its link plz send me,....plz

How about HobbyKing i86?
http://www.ebay.in/itm/Hobbyking-i86-Multi-Rotor-Control-Board-/200987900268?pt=IN_Toys_Games_School_Stuff&hash=item2ecbcff96c#ht_2500wt_1188

Turnigy 2200mAh 3S 20C Lipo Pack
http://www.ebay.in/itm/Turnigy-2200mAh-3S-20C-Lipo-Pack-with-XT60-Connector-/191012283131?pt=IN_Toys_Games_School_Stuff&hash=item2c793822fb&_uhb=1#ht_2171wt_1188

B3AC Charger:
http://www.ebay.in/itm/IMAX-B3-PRO-Charger-B3AC-2S-3S-Lipo-Balance-Charger-Black-AC-100-240V-/191012307714?pt=IN_Toys_Games_School_Stuff&hash=item2c79388302&_uhb=1#ht_2039wt_1188