Print Page - wanted 35 Mzh receiver

Title: wanted 35 Mzh receiver
Post by: sandeepm on March 15, 2010, 01:56:02 PM

Hi,
i need low cost second hand and working 35 Mhz 6 chnl receiver with 35.170 Mhz crystal. should be light weight.

sandeep

Title: Re: wanted 35 Mzh receiver
Post by: anwar on March 15, 2010, 03:22:12 PM

Why not Corona :)

Title: Re: wanted 35 Mzh receiver
Post by: flying doc on March 16, 2010, 12:45:35 AM

Anwar how do u rate Corona as receivers? Are they compatable with futaba TX's? I read on some forums that they have problems linking wih Futaba transmitters? Should the receiver be of the exact frequency as the Transmitter. ie. 35.160 Mhz?
Regards
Doc

Title: Re: wanted 35 Mzh receiver
Post by: anwar on March 16, 2010, 12:56:44 AM

I have a 72Mhz 8 channel one I use on a foamy. My brother and two others on the field are using them on all kinds of planes (up to 60 size nitro ones). So far they work as advertised, and all of us are on Futaba (except one who has both Hitec and Futaba TXes, not sure which one he uses the Corona with).

Title: Re: wanted 35 Mzh receiver
Post by: flying doc on March 16, 2010, 01:01:37 AM

Does the RX have to be the exact frequency as the TX? I have a 35.160 Mhz TX, does the RX have to be the same or can it be any 35 Mhz?

Title: Re: wanted 35 Mzh receiver
Post by: anwar on March 16, 2010, 01:36:33 AM

Nope, these are synthesized (channel/crystal free). They will lock on to your TX channel (when you follow the procedure for that).

Title: Re: wanted 35 Mzh receiver
Post by: flying doc on March 16, 2010, 01:55:45 AM

Thanks Anwar. I have yet to find a LHS for the corona RX's. Do u kow of any? If not then I hear Hobbycity.com has the whole range.

Title: Re: wanted 35 Mzh receiver
Post by: anwar on March 16, 2010, 02:01:33 AM

http://stores.shop.ebay.in/rcforallin__W0QQ_sacatZrcforallinQQ_sidZ675641320?_nkw=corona&submit=Search

Title: Re: wanted 35 Mzh receiver
Post by: flying doc on March 16, 2010, 02:05:38 AM

Got it, Thanks again.
Doc

Title: Re: wanted 35 Mzh receiver
Post by: rcforall on March 16, 2010, 10:53:24 AM

The Corona receiver operated at 1.3 kms from base quite comfortably without a glitch while flying fpv this week end

RC India

RC Baazar => Wanted => Topic started by: sandeepm on March 15, 2010, 01:56:02 PM