wanted urgently rcb6i receiver
kp
REPLY FORUM MEMBERS
KP
I can give a spare one with a broken antenna. Could be used for testing or research and development.
FIRST OF ALL THANKS FOR SHOWING CONCERN.
i HAVE ALSO BROKEN RECEIVER OF RCB6I BUT ITS ANTENA WIRE IS DETACHED. FURTHER, IF I SOLDER THE ANTENA WIRE IT WILL GIVE ME 100 % ACCURACY OF MAY BE RANGE PROBLEM
KP
You can resolder the antenna, there will no reduction in range. The range will be reduced only if you trim the exposed part of the signal cable in the antenna wire which is at the other end, the range is not affected if you trim it from the solder connection side. Just make sure you don't bridge the antenna ground and signal on the receiver, it won't work then.
I remember reading somewhere that the exposed or clipped part of the antenna wire has a relationship to the frequency at which the radio works, 2.4ghz in this case.
Yes exactly thats how it is, that is why I said not to trim that part or else it will be of no use.
respect young boss. keep learning.
Yashan R sir
u have any video link of soldering antena of receiver
kp
https://youtu.be/g3i7Ff-3srQ
The video is not of your receiver but you will get an idea of how to replace it