Print Page - Wanted heat shrink

Title: Wanted heat shrink
Post by: Subbiya on April 16, 2015, 11:26:57 PM

Hi,
I need heat shrink for 3.5mm connector & XT60. Can someone tell me where can i get this one in chennai. if not outside. Is there any alternative for this. Can I use normal plastic sleeves. ?

Is this is the correct one ?
http://www.ebay.in/itm/2mm-Polyolefin-HeatShrink-Tube-3-Meter-BLACK-High-Quality-Heat-Shrink-sleeve-/190885221826?pt=LH_DefaultDomain_203&hash=item2c71a555c2 (http://www.ebay.in/itm/2mm-Polyolefin-HeatShrink-Tube-3-Meter-BLACK-High-Quality-Heat-Shrink-sleeve-/190885221826?pt=LH_DefaultDomain_203&hash=item2c71a555c2)

Title: Re: Wanted heat shrink
Post by: Himadri Roy on April 16, 2015, 11:34:09 PM

2mm is too small...you'll need 4mm heatshrinks!

Title: Re: Wanted heat shrink
Post by: gunnu on April 17, 2015, 01:01:49 AM

suggest you to buy 5mm or 6mm.

Quote from: Himadri Roy on April 16, 2015, 11:34:09 PM
you'll need 4mm heatshrinks!

if solder sticks outside your connector than 4mm shrink wont fit.(personal experience)

regards

Title: Re: Wanted heat shrink
Post by: Bilal on April 17, 2015, 05:40:17 AM

www.vortex-rc.com (//http://)

Title: Re: Wanted heat shrink
Post by: miginstruments on April 17, 2015, 10:43:17 AM

also available on rcmumbai.com

RC India

RC Baazar => Wanted => Topic started by: Subbiya on April 16, 2015, 11:26:57 PM