Need Help foe setting up FPV 5.2 ghz

heliboycochin · January 25, 2013, 01:01:34 PM

Hai
i have recive my 5.2 ghz 200 mv Video tx n rx
Pls any body can help me how to setup with my hexacoptor
In Tx How much Power i shuld give And shall i use any ectra Liop on hexa for Video TX ?
and also i need to setup a ground station
i also have 7" lcd monitor and 11.1 v 3c lipo for monitor
and shall i can give power to Video Rx frm same battery to power up rx ??
pls guide me inset by setup to setup
i have extra sony fpv camera also
and gopro 3

deepakkshr · January 25, 2013, 01:20:07 PM

please provide some more details. where you got ? link. so that we can help you

heliboycochin · January 25, 2013, 01:25:14 PM

Hobbyking
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=15295

satyagupta · January 25, 2013, 02:30:03 PM

something similar:

deepakkshr · January 26, 2013, 01:33:09 PM

Hello

http://www.hobbyking.com/hobbyking/store/uploads/123148712X274852X8.pdf

http://www.hobbyking.com/hobbyking/store/uploads/230577007X52655X30.jpg

Try these for wiring setup and see if it works

heliboycochin · January 26, 2013, 02:17:30 PM

thanks very much

deepakkshr · January 26, 2013, 02:43:42 PM

most welcome

heliboycochin · January 28, 2013, 02:17:57 PM

What about power setup on coptor .. for transmiter video ?? shall i need extra 7.2 v lipo shuld buy ?
iam using to fly my hexa is 11.1v 3c 5000 mah battery
so shall i put extra battery for that

video transmiter volt showing 7.2 v

satyagupta · January 28, 2013, 04:27:29 PM

3s will also do, and 5000 mah has lots of power so no need of extra battery just for tx. Do keep your vtx in such a way that air flows around it, i have read a lot that it tends to get hot a lot.

heliboycochin · January 28, 2013, 04:47:54 PM

sir it need only 7.2 v
so how to give such volt from 11.1 v lipo ?
so i think can i put 7.2 v lipo extra ?

satyagupta · January 28, 2013, 05:41:45 PM

Every electronic equipment has an operating voltage range, if you check the HK link of the FPV tx and rx you will find this line

QuoteTransmitter operating voltage: 7~15VDC / 150mA

So 7V is the min operating voltage which ranges to 15V so you can use 3S to power your tx without any problem

heliboycochin · January 29, 2013, 10:51:50 AM

Thanks Sir

heliboycochin · January 29, 2013, 02:47:29 PM

DONE ALLL....
SUCESS..
THANKS ALL ..VERY THANKS

satyagupta · January 29, 2013, 03:23:58 PM

Great good please share logs or guides for other users it can be very help full for other novice users.

deepakkshr · January 29, 2013, 07:59:59 PM

pranavh · February 09, 2013, 12:02:08 AM

Did you have any customs problem? I need a 5.8GHz set for my project, and it is time-critical.

murcielago · February 09, 2013, 09:09:35 AM

Quote from: pranavh on February 09, 2013, 12:02:08 AM
Did you have any customs problem? I need a 5.8GHz set for my project, and it is time-critical.

Indian Customs !...U never know..If it comes in ur time line then its "Luck by Chance"