RC India

RC Baazar => Wanted => Topic started by: Nehutech on February 19, 2010, 12:48:16 PM

Title: Wanted servos
Post by: Nehutech on February 19, 2010, 12:48:16 PM
hello to all members

i m needed some servos of 9 grms.

also needed some servo part (gears) for DYS 9grm



Title: Re: Wanted servos
Post by: VC on February 19, 2010, 02:14:10 PM
I too, am looking for some 9 Gm servos at CHEAP prices. If some kind hearted souls can oblige, I would be grateful.

Of course, first preference should go to Nehutech. In case, after his requirements are met, there are any more left over - I'm game. I also need servo horns and clevises.

Regards,

VC
Title: Re: Wanted servos
Post by: sandeepm on February 19, 2010, 09:34:27 PM
Hi VC and Nehutech,
buying second hand servos will be waste of money. person will sell you old servos at not less then 250 each ................better you buy these 9 gm serovs from HC. landing cost of turnigy 9gm will cost you not more then rs 200. Order them in bulk of 6 nos. there wont be any problem with customs if value is less then rs 2000 and package is small. This is my Experience.
sandeep
Title: Re: Wanted servos
Post by: Nehutech on February 20, 2010, 04:46:38 PM
thanks sandeepbhai for ur advice
But i don't have credit card to pay HC so i m searching the person from whom i can buy the servos my first choice is turnigy 9gm.


Title: Re: Wanted servos
Post by: buzz_rc on February 20, 2010, 05:18:28 PM
You can pay HC via Western Union....
Title: Re: Wanted servos
Post by: Nehutech on February 21, 2010, 02:14:11 PM
hi buzz_rc

thanks will try tmro
Title: Re: Wanted servos
Post by: buzz_rc on February 21, 2010, 03:23:03 PM
Your most welcome   :)
Title: Re: Wanted servos
Post by: atul_pg on February 21, 2010, 03:56:41 PM
one of my friend had bad experience with the cheap turnigy servos..just wanted to point that out..so if you are ordering make sure you order them in bulk as chances are one or two servos would not be working properly...

all the best..
Title: Re: Wanted servos
Post by: ankur on February 21, 2010, 06:34:00 PM
if servos can be imported then go to dealsextreme.com they have very cheap servos[4-6$ ] with free shipping
they are very good for u all
i will  soon provide the links
Title: Re: Wanted servos
Post by: atul_pg on February 21, 2010, 06:49:18 PM
some links from dealextreme..

http://www.dealextreme.com/details.dx/sku.20087~r.60941370

http://www.dealextreme.com/details.dx/sku.20089~r.60941370

http://www.dealextreme.com/details.dx/sku.20084~r.60941370

http://www.dealextreme.com/details.dx/sku.12859~r.60941370
Title: Re: Wanted servos
Post by: vinay on February 21, 2010, 07:04:22 PM
Get the HXT900 from hobbycity, they are considered the best in low price range.