Wanted used Tx with Rx (4-6 channel)

Started by Aafi, April 28, 2011, 01:57:00 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Aafi

Hey all,
I need a Tx and a compatible Rx (4 or 6 channels)
I am looking for a used one as I am a bit tight on budget.
If any1 interested to sell their working  :) tx along with the rx plz lemme know..


SunLikeStar


sandeepm

i have converted my non working 72 Mhz EFly 100 C 6 channel tx to 2.4 GHz with Corona DIY module. range is still to be tested. if you are interested i will test the range on some plane and then u can take it. will let you knowabt the cost later on. it is with receiver.

Sandeep
Fly high if you have good set of batteries.....!

jay sarang


jay sarang

m intrested ........

can u plzz tell me the cost......

Aafi

Quote from: SunLikeStar on April 28, 2011, 09:29:55 AM
what's your budget?
I am looking for something in the range of Rs.1500-2000

Aafi


Aafi

Any1 willing to sell their used tx with rx for 2k.

rcpilotacro

I have this used Tx (2-3 Flights) Didn't come with a receiver, i will give this compatible Spektrum DSM2 Orange Rx with it for free. gimme what i bought it for. good Tx, You can switch from mode 1-2 with a flick of a switch, link for the manual is there in the post below. servo reversing is easy , no switch (read manual) has electronic trim and extremely light .
For details See this post
http://www.rcindia.org/for-sale/used-parkzone-dsm2-compaitable-4ch-transmitter-for-sale-pkz3341/

Reason for giving away
Making way for 14 MZ
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

sundaram

Quote from: augustinev on May 03, 2011, 06:11:38 AM
Making way for 14 MZ

Way to go Gusty sir,  :thumbsup: I am going green with envy. I am dying to come and have a look, can hardly wait.

where are you buying it from? and how are you getting to India

sultan alam

Aafi,
  If u are not hurry to buy the tx/rx then my suggestion buy this one.
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9042
This is really a cheap solution.The total cost will be including shipping charges is around 2000 and take 2 monts to deliver.

KALYANPRODHAN

Hey,

I strongly recomend you to Purchase Tx at least from india to avoid importng hastle. You can import Rx, but problem goes when it's Tx.


Perhaps you have see the thread.
http://www.rcindia.org/for-sale/for-sale-futaba-t6x-with-receiver/msg60245/#new

It's Old FM, but Futaba with Display and with two Receiver.
We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.

Aafi

#12
Quote from: KALYANPRODHAN on May 03, 2011, 08:39:20 AM
Perhaps you have see the thread.
http://www.rcindia.org/for-sale/for-sale-futaba-t6x-with-receiver/msg60245/#new
yeah.. I've seen that.. but its out of my budget.. I am running on a very tight budget to get started with this hobby..

sultan alam

Quote
yeah.. I've seen that.. but its out of my budget.. I am running on a very tight budget to get started with this hobby..

Ok Another solution made ur own tx ans rx set if u have some little knowledge about electronics.
See this thread:http://www.rcindia.org/radios-and-receivers/simplest-tx-rx-diy-anyone-interested/

rcpilotacro

Aafi , if you can pay me installments, in fact you can get in touch with Praveen (pvn2000) and give it to him in installments say in 3-4 months, whatever suits you, aim is , you should start off with the hobby
Gusty's Hangar and Introduction.

A Good pilot will practice until he gets it right,
A Great pilot will practice until he can't get it wrong.

Aafi

#15
Quote from: sultan alam on May 03, 2011, 09:43:07 AM
Ok Another solution made ur own tx ans rx set if u have some little knowledge about electronics.

Wish I knew electronics.. but I don't. :(

sultan alam

Aafi,
     I may build totally complete system for u within ur budget.I will not take any extra charges from u at all.If OK then contact me.

vineet

guys plz let me know if anybody have a turngy 9 channel tx rx , or any other tx above 6ch.

Aafi

Thanks every1 for the help.. I finally ordered HK 6ch Tx. Good to start with., may be later I will go for Futaba.